Mechanical and electrical engineering systems (M & E) • LOLER Thorough Examinations • PSSR Thorough Examinations and written schemes • PUWER inspection • COSHH Thorough Examination and test • Agricultural equipment, including telescopic handlers and front loaders • Mobile elevating work platforms • Pressure systems, including major, intermediate and minor • Regulatory compliance engineering • Loss control engineering • Accident investigation • Equipment failure investigations • Material failure • Technical due diligence • Health and safety...

Health & safety • Mechanical engineering design • Investigation of industrial accidents, personal injuries & fatalities • Occupational diseases (asbestos, noise, hand-arm vibration) • Investigations of fire & explosions • Investigation of defective engineering design & plant mal-performance • Risk assessments • PPE • Safe systems of work • Legionnaires disease

Consultant Forensic Engineer & expert witness undertaking the investigation of engineering incidents & personal injury accidents for commercial, legal & insurance clients • Provision of independent & impartial expert witness evidence • Mechanical, metallurgical & non-metallic materials (i.e. polymer, composite, rubber, glass & ceramic materials) based investigations • Forensic investigations both on-site & laboratory based • Component failure analysis, including expertise in fractography & electron microscopy (SEM) •...

Investigation of industrial accidents • Preparation of detailed court reports supported by photographs & plans • Manual handling • Upper limb disorders • Falls & falling objects • Slipping & tripping • Machinery • Noise & deafness • Component failures

• Forensic engineering and expert witness services • Delay and quantum analysis • Construction disputes • Complex insurance claims

Vehicle, plant & machinery fires • Escape of water (water leak) investigation • Mechanical failure investigation • Personal injury • Road traffic collisions

Personal injury • Product liability • Professional negligence claims • Environmental health • Consumer protection • Building & construction problems & safety • Playground accidents • Ladder accidents • Structures & structural engineering • Road traffic accident investigation & reconstruction • Agricultural & horticultural • Manufacturing industries • Electrical safety • Chemical safety • Industrial diseases • Musculoskeletal disorders & RSI • Slips, trips & falls • Fork-lift trucks • Guards & guarding systems • Factory accidents Experts in the...

General safety & electrical engineering issues • Equipment used in potentially explosive atmospheres • Application of health & safety legislation & assessment of risk • Suitability of equipment & design specification • Track-mounted cableway installations • Provision & Use of Work Equipment Regulations (PUWER) • Dangerous Substances & Explosive Atmospheres Regulations (DSEAR) • CE Machinery Directive Additional office at: • 188 Burton Road, Ashby de la Zouch , Leicestershire, LE65 2TF.

I can provide reports relating to most aspects of road vehicles, agricultural machinery & general engineering covering the following subjects: • Accident investigation & reconstruction • Damage, cost assessment (vehicle) • Vehicle valuations • Mechanical failures • Vehicle fire investigation • Photography & video recordings can be provided on these subjects

Consultant Forensic Mechanical & Materials Engineer & expert witness (practising since 1997, 18 years with Dr J H Burgoyne & Partners LLP (Burgoynes), 9 of which as a partner) • Forensic mechanical engineering-based investigations • Forensic metallurgical based investigations • Forensic polymer/non-metallic materials based investigations • Forensic component failure analysis, including expertise in fractography & electron microscopy • Forensic investigations into the cause of damage to equipment & machinery • Forensic...

Investigation & testing of building & civil engineering materials & components Charles Darley Associates are independent materials testing consultants. Expertise is available in a wide range of materials and components including blockwork, cladding, reinforced and pre-stressed concrete, flooring, glazing, plaster, render, roofing systems and screeds. Dr Darley specialises in failure investigation, appraisal of latent defects and deterioration and assessment of physical damage.

A senior manager of structures & design within an engineering consultancy (established over 40 years) • Over 30 years' experience, with specialist knowledge of the following: • The roll-over of heavy goods vehicles • Structural analysis • Computational structural analysis • Design • Structural design

Building services engineering, mechanical & electrical • Commercial vehicles • Mechanical components & machinery failure investigations • Engineering design

1. Power plants (fossil fueled, combined-cycled, solar other RES). Expertise in power systems, protection, switchgear, transformers, generators, automation, communications 2. Data analytics - statistical analysis, based on statistical process control (SPC) and statistical quality control (SQC) 3. Maintenance activities, root cause analysis, root cause failure analysis 4. International arbitration in construction and energy disputes 5. (Re-) Insurance claims support 6. Loss adjusters support Mr Maliakis is based...

Occupational health & safety • Noise-induced hearing loss (NIHL) • Noise surveys • Ergonomics & manual handling • Slipping accident investigation • Ladders & scaffolding • Cranes & lifting equipment • Play areas & equipment • Machine tools • Workshops • Machine guarding • Bearings • Consumer product defects • Consumer product safety • CE marking & product compliance • Helmets • Personal protective equipment (PPE) • Laser safety • Non-ionising radiation • Electromagnetic compatibility (EMC) & electromagnetic interference (EMI)

Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgrounds; scaffolding; warehousing industry; welding; woodworking industry Mechanical design • Mechanical appliances • Mechanical engineering, including project...

Principal Consultant of structural analysis for a major consultancy operating worldwide • Over nearly 30 years my particular fields of expertise are: • Stress analysis • Structural design, analysis, engineering & integrity • Finite element analysis • Fatigue • Fracture mechanics • Creep • Crack growth • Failure analysis • Dynamics • Vibration • Shock • Non-destructive testing • Design code assessments • Pipewhip • Missiles • Jet loadings • Blast • Safety cases • Risk management • Probabilistic analysis • Peer review

Metallurgical failure investigation • Failure analysis of polymer and composite materials • Expertise in a range of failure mechanisms, i.e. corrosion, mechanical failure, high temperature, structural failure, welding, coatings • Particular expertise in the thermal degradation of austenitic stainless steels and nickel-based alloys • Extensive experience in corrosion mechanisms for the power, petrochemical and oil and gas industries • Forensic engineering

The forensic investigation of failed mechanical parts and machinery from general industrial/manufacturing, electrical power generation/transmission, petrochemical, automotive, water and construction industries • Collapse of cranes and large structures • Detailed experience of metal casting, reciprocating engines, gas turbines and other rotating machinery • Investigation of escapes of water/oil in domestic and commercial environments • Investigation of fractured glazing

After training as a marine engineer, I pursued a career in heat and mass transfer until establishing my own consulting firm. I was first retained by the Department of Energy, then by the DTI Design Advisory Service and the Production Engineering Research Association. I have since undertaken 46 plant design and build projects alongside 53 process consultancies, and completed 17 expert witness instructions. My CEng registration was predicated by the design and engineering of major projects for Alcan Aluminium,...

Tribology (dry and lubricated) and associated testing • Lubricants technology • Lubricant assessment - knowledge of a range of lubricants, their use, formulation and application • Failure analysis - materials aspects of the failure of equipment, root cause failure investigation and mitigation • Mechanical testing • Metrology

Mr Mamoon Alyah is a Chartered Electrical Engineer with 36 years of experience. Over the years, Mr Alyah has been instructed as an expert by clients in the USA, UK, Europe, Middle East and Australia. He prepared expert reports and provided expert advice in matters involving electrical power such as turbines (gas, steam and hydro), solar (PV and CSP), wind, transformers, switchgear, cables and others. Mr Alyah has given evidence in courtrooms and arbitration proceedings in numerous jurisdictions around the...

I have a wide experience in mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good track record...

Materials analysis • Microanalysis using energy & wavelength dispersive X-ray analysis & interpretation of analysis results in engineering failures or materials characterisation • Scanning electron microscopy • Fractography • Hydrogen embrittlement of fasteners • Copper pipe failures • Fastener failures • Fuse failures • Metallic packaging failures (including beverage cans) • Pitting corrosion & preferential corrosion in water supply systems • Particle analysis & wear debris analysis • Electrical equipment failures associated...

Metallurgist, materials scientist, inspection and failure expert • 40 years+ experience • Experienced expert witness • Non-destructive testing and evaluation (NDT, NDE) • Failure analysis • Metallurgical analysis • Fracture mechanisms • Inspection performance & reliability • Probability of detection (POD) • Human reliability • Digitalisation • Corrosion • Cracking • Hydrogen embrittlement (HIC) • Welding defects • Steam turbine failures • Hospital pipework • Storage tanks & facilities • Pipelines • Composite materials (GRP, CFRP) • Offshore • Oil...

Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering;...

Mechanical engineering • Asset management • Pressure vessels • Pressure systems • Lifting equipment and lifting operations • Safety of amusement rides • Safety of fairground rides • Machinery guarding • Movable bridges • Steel industry • Water pumping stations • Bulk handling equipment • Marine engineering • Mechanical lifting equipment • Lock gates • Power hydraulics • Industrial engineering

Consultant Chartered Engineer with extensive experience of electrical and control systems engineering, primarily relating to electrical installations and equipment • Certified Member of the Expert Witness Institute • CUBS Criminal Expert Witness Certificate holder • Published author on electrical safety of installations and equipment (by the IET) • BSI Standards Committee Chair or Member covering electrical installations and electrical safety, events and entertainment (including film and TV), electromagnetic compatibility...

30 years working in power generation • Industrial plant • Project development and operations Experienced with major coal, oil and gas-fired power plants • Renewable energy • Wind turbines • Solar farms • Biomass • Electrical networks • Repair and maintenance facilities • Rotating machinery • Diesel engine generators • Gas-fired engines • Boilers • Transformers • Gas and steam turbines • Steam systems • Compressors • Pumps • Heat exchangers • Fuel preparation and storage • Materials handling • Investigations and root cause analysis • Drafting reports

Investigating the causes of fires, explosions, electric shocks, personal injuries, vehicle fires, engineering failures & matters of contractual dispute • Assisting with litigation processes & appearing as expert witness • Training & lecturing in above matters can be provided, especially for continuing professional development

Metallurgy • Welding fabrication • Corrosion • Materials selection • Mechanical testing of materials • Identification of material damage mechanisms

Glass analysis • Paint analysis • Fibre analysis • Footwear mark & toolmark comparisons • Forensic evidence, general • Analytical chemistry • Drink drive calculations • Drug analysis, valuation & packaging • MDT analysis • Drug driving • Electronic tags

Compliance of machinery to legal requirements (e.g. Supply of Machinery (Safety) Regulations) and associated designated standards and the Machinery Directive (EU) • Functional safety of machinery • Provision and Use of Work Equipment Regulations (PUWER), e.g. guarding of machinery • Safety of electrical and control systems for machinery

Mechanical engineering machinery & components • Engines, transmissions, turbines, compressors, pumps • Gears, chains, bearings, brakes, clutches, couplings • Lubrication methods & systems • Friction & wear • Industries: rail, automotive, power, process, food, manufacturing, alternative energy (wind), marine, aviation, mining, oil & gas, chemical Additional e-mail: [email protected]

Escapes of water, oil and gas • Mechanical engineering • Building fires • Explosions • Vehicle, plant and machinery fires • White goods appliance fires • Composites • Glass and ceramics • Plastics and polymers • Manual handling