Rotating equipment • Packaged equipment • Machinery damage assessments • Mechanical and piping systems • MEP, oil, gas, power, petrochemical and energy transition • Pipelines • Wind turbine generators • Gearboxes • Pumps • Compressors • Diesel generators • Gas turbines • Air coolers • Heat exchangers • Heaters • HVAC • Pressure vessels • Valves • Lifting equipment • Asset integrity • LNG • LPG • Offshore • Cost estimates • Accident investigation • Root cause analysis • Contract management • Tendering • Procurement

Keith has wide knowledge and experience in building services engineering (UK/international) in mechanical and electrical systems; private, public and military sectors. • Forensic engineering analysis professional competence - compliance with regulations, standards UK, EU(EN) • Power generation and electrical installations (power and lighting) design and construction • Mechanical (HVAC) engineering systems • Premature obsolescence, materials life-cycling

Mr Mamoon Alyah is a Chartered Electrical Engineer with 36 years of experience. Over the years, Mr Alyah has been instructed as an expert by clients in the USA, UK, Europe, Middle East and Australia. He prepared expert reports and provided expert advice in matters involving electrical power such as turbines (gas, steam and hydro), solar (PV and CSP), wind, transformers, switchgear, cables and others. Mr Alyah has given evidence in courtrooms and arbitration proceedings in numerous jurisdictions around the...

Mechanical engineering • Pressure vessels • Pressure systems • Safety of amusement rides • Safety of fairground rides • COMAH regulations • Gas explosions • Machinery guarding • Forensic engineering • Scaffolding • Construction • Chemical industry • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE

Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgrounds; scaffolding; warehousing industry; welding; woodworking industry Mechanical design • Mechanical appliances • Mechanical engineering, including project...

I have a wide experience in mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good track record...

Occupational health & safety • Noise-induced hearing loss (NIHL) • Noise surveys • Ergonomics & manual handling • Slipping accident investigation • Ladders & scaffolding • Cranes & lifting equipment • Play areas & equipment • Machine tools • Workshops • Machine guarding • Bearings • Consumer product defects • Consumer product safety • CE marking & product compliance • Helmets • Personal protective equipment (PPE) • Laser safety • Non-ionising radiation • Electromagnetic compatibility (EMC) & electromagnetic interference (EMI)

Consultant Forensic Engineer & expert witness undertaking the investigation of engineering incidents & personal injury accidents for commercial, legal & insurance clients • Provision of independent & impartial expert witness evidence • Mechanical, metallurgical & non-metallic materials (i.e. polymer, composite, rubber, glass & ceramic materials) based investigations • Forensic investigations both on-site & laboratory based • Component failure analysis, including expertise in fractography & electron microscopy (SEM) •...

Tribology (dry and lubricated) and associated testing • Lubricants technology • Lubricant assessment - knowledge of a range of lubricants, their use, formulation and application • Failure analysis - materials aspects of the failure of equipment, root cause failure investigation and mitigation • Mechanical testing • Metrology

30 years working in power generation • Industrial plant • Project development and operations Experienced with major coal, oil and gas-fired power plants • Renewable energy • Wind turbines • Solar farms • Biomass • Electrical networks • Repair and maintenance facilities • Rotating machinery • Diesel engine generators • Gas-fired engines • Boilers • Transformers • Gas and steam turbines • Steam systems • Compressors • Pumps • Heat exchangers • Fuel preparation and storage • Materials handling • Investigations and root cause analysis • Drafting reports

Occupational safety & health representation • Accident/incident investigation • Risk assessment & analysis • Management systems • Safe work systems • Human factors • Engineering failures • Compliance • Due diligence • Expert witness • COVID 19 risk assessment, audit & compliance checking • Review of systematic failures and consequences investigation.

Lifts, escalators & machinery • Criminal, civil & coroners courts • Personal injury • Design & regulatory compliance • LOLER & PUWER, & CDM regulations • Accident & failure investigation • Construction & maintenance contracts • NHS HTM08-02 AE lifts • Quantum assessment • Landlord & tenant & dilapidations • PFI contract disputes including handback assessment, condition reporting & quantum • Arbitration • Adjudication • Mediation • Expert determination & negotiation • 47 years' experience as a contractor engineer, manager & consulting...

Expertise: • Safety • Accident investigation • Health & Safety at Work Act & Regulations • Personal injury • Fires • Explosions • Risk assessment • Safety management • Occupational accidents • Product safety • Dangerous goods • Falls • Mechanical or structural failure • Machinery Sectors: • Industrial • Construction • Mechanical • Electrical • Manufacturing • Factories • Oil • Gas • Offshore • Chemicals • Pipelines • Railways • Public transport • Ports & docks • Food • Retail • Leisure

Accident damage to motor vehicles • Mechanical failure in vehicles & plant • Inspections of mechanical plant • Valuations of vehicles • Valuations of mechanical plant • Inspection of damage to agricultural vehicles & machinery • Valuation of agricultural vehicles & machinery

Detailed forensic investigation of accidents, incidents, materials and mechanical failure • Product liability/fitness for purpose • Application of health and safety legislation and associated standards • Hazard identification and assessment of risk • Incorporated Engineer with practical experience in the Lifting Equipment and Lifting Operations Regulations (LOLER) and Pressure Safety Systems Regulations (PSSR) inspection industries • Competent in lifting equipment, work equipment, Machinery Directive and general workplace...

Accident investigation: • Industry & industrial premises • Construction & building • Docks • Agriculture • Transport & road traffic; highway • Offices & shops • Hospitals & nursing homes • Education • Sport & leisure • Domestic • Mechanical engineering: • Machinery defects & disputes • Cranes & lifting equipment • Papermaking machinery • Boiler plant & steam ancillaries • Mechanical handling equipment, including fork-lifts • Consumer product defects • Safety design • Machine tools • Manufacturing engineering & processes • Hydraulic engineering • Pneumatic...

Innovation design • Accidents • Use • Misuse • British Standards • European Standards • Testing • Kitemark testing • Manufacture • Product specifications • Aluminium towers • Ladders • Stepladders • Trestles • Stagings • Scaffolds • Access products • Shoring products • Formwork products • Construction products

Vehicle, plant & machinery fires • Escape of water (water leak) investigation • Mechanical failure investigation • Personal injury • Road traffic collisions

Building & construction problems • Negligence (construction) • Professional negligence (architecture/construction) • Home improvement disputes • Contractual disputes (construction) • Contractor & subcontractor disputes • Improper contract administration (construction) • Cost disputes (construction) • Professional fees claims • Programming & time disputes (construction) • Property insurance & claims investigation • Claims investigation (property insurance) • Public liability insurance (construction) • Contractor insurance • Professional...

Mechanical engineering • Asset management • Pressure vessels • Pressure systems • Lifting equipment and lifting operations • Safety of amusement rides • Safety of fairground rides • Machinery guarding • Movable bridges • Steel industry • Water pumping stations • Bulk handling equipment • Marine engineering • Mechanical lifting equipment • Lock gates • Power hydraulics • Industrial engineering

Investigation of engineering, materials and corrosion-related failures • Mechanical failures in load-bearing components • Glass damage • Metallurgical incidents • Analysis of fire-damaged metals • Fibre identification • Investigation of cargo damage • Cargo liquefaction cases • Incidents involving coating failures (paint) I have provided expert testimony in court in the UK, Hong Kong and Singapore.

Health & safety • Mechanical engineering design • Investigation of industrial accidents, personal injuries & fatalities • Occupational diseases (asbestos, noise, hand-arm vibration) • Investigations of fire & explosions • Investigation of defective engineering design & plant mal-performance • Risk assessments • PPE • Safe systems of work • Legionnaires disease

Quality, Safety, Health, CDM, Environment, Sustainability, Security and Risk Consultant with a career in public and private organisations covering the construction, civil engineering, facility management, consultancy and insurance service sectors. Highly experienced in the following management standards: ESG, ISO 9001, ISO 14001, ISO 45001, NSI Gold, SIA ACS, Construction Line, Safe Contractor, Safe T Cert, etc.

Mechanical and electrical engineering systems (M & E) • LOLER Thorough Examinations • PSSR Thorough Examinations and written schemes • PUWER inspection • COSHH Thorough Examination and test • Agricultural equipment, including telescopic handlers and front loaders • Mobile elevating work platforms • Pressure systems, including major, intermediate and minor • Regulatory compliance engineering • Loss control engineering • Accident investigation • Equipment failure investigations • Material failure • Technical due diligence • Health and safety...

The forensic investigation of failed mechanical parts and machinery from general industrial/manufacturing, electrical power generation/transmission, petrochemical, automotive, water and construction industries • Collapse of cranes and large structures • Detailed experience of metal casting, reciprocating engines, gas turbines and other rotating machinery • Investigation of escapes of water/oil in domestic and commercial environments • Investigation of fractured glazing

Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering;...

Technical fields: • Airport ground handling systems & equipment • Mobile & static airport ground power systems • Light rapid transit & people-mover systems • Guided vehicles, design & application • Automation & robotics • Automated steel foundry & aluminium smelter plants • Mechanical handling systems & equipment • Tractor, trailer & general vehicle design • Integrated military transport systems • Civil & military truck designs • Electric & hybrid vehicles • Electric & electronic equipment • Pharmaceutical advanced handling & blending...

• Forensic engineering and expert witness services • Delay and quantum analysis • Construction disputes • Complex insurance claims

Technical: • Petroleum products, including treatment design & development • Energy conservation & management • Environment • Oil & gas processing • Pipelines • Metal cutting • Metal forming • Mineral oil extraction • Gas supply & control • Pharmaceutical products • Process plant • Pressure vessels • Food & drink processing machinery • Chemical industry machinery • Welding • Functional: • Consultancy services • Process engineering & contracting • Quality control • Assurance & inspection ISO 9001/2 • Project management • Purchasing & procurement • Contracting •...

I am a Chartered Quantity Surveyor with significant experience in the construction and engineering industry. My expertise covers professional negligence, contractual disputes, contract administration issues and costs disputes. I am the holder of an expert witness training certificate issued by the Royal Institution of Chartered Surveyors (RICS).

I have extensive experience in the design, specification, supervision and/or project management of mechanical and electrical engineering services installations, on a wide variety of commissions, including healthcare projects. During that time I have undertaken design audits and/or detailed technical appraisals of both new and existing mechanical and electrical engineering services installations, prepared expert witness reports and provided advice to clients and their legal representatives in respect of duties...

Safety strategy and high-level policies • Hazard identification • Hazard assessment - qualitative and quantitative • ALARP • Safety integrity targeting • Safety integrity verification • Safety measure implementation, adequacy and assurance • Safety validation • Safety justification of complex equipment • Safety procedures/process development • Safety indicators/safety monitoring and reaction to events • Accident/incident investigation

Nick is a Chartered Engineer and has been a mechanical engineer at Brookes Bell since 2005. He obtained MEng in Mechanical Engineering with Energy Studies from The University of Strathclyde in 1999. He obtained PhD in fluid mechanics research in 2005. His principal role at Brookes Bell is Computational Fluid Dynamics (CFD) analysis for various hydrodynamic and aerodynamic projects and fire simulations. He has advised clients as an independent expert on a number of legal cases and given evidence in arbitration...

I accept instructions from defendants and claimants via solicitors on most health and safety topics. I have particular experience in health and safety legislation, fatal accident investigation, manufacturing, construction, banking, education, healthcare, charity, retail and pharmaceuticals. My skills include: risk assessment, training, work at height, fall prevention, safe systems of work, safety documentation and policies, fire safety and protection, COSHH, manual handling and work equipment.

Escapes of water, oil and gas • Mechanical engineering • Building fires • Explosions • Vehicle, plant and machinery fires • White goods appliance fires • Composites • Glass and ceramics • Plastics and polymers • Manual handling

Consultant Forensic Mechanical & Materials Engineer & expert witness (practising since 1997, 18 years with Dr J H Burgoyne & Partners LLP (Burgoynes), 9 of which as a partner) • Forensic mechanical engineering-based investigations • Forensic metallurgical based investigations • Forensic polymer/non-metallic materials based investigations • Forensic component failure analysis, including expertise in fractography & electron microscopy • Forensic investigations into the cause of damage to equipment & machinery • Forensic...

I am a chartered quantity surveyor with over 18 years’ construction experience in residential, Ministry of Defence, education, healthcare, industrial, mixed-use, infrastructure and commercial building. I have significant hands-on experience in quantity surveying and contract administration under numerous suites/forms of contract including JCT, PPC, NEC, EPIC/EPC and bespoke forms, as well as experience of most methods of procurement. I am a Partner at Quantum Experts and able to act as a party-appointed or...

Building services engineering, mechanical & electrical • Commercial vehicles • Mechanical components & machinery failure investigations • Engineering design

Mechanical engineering machinery & components • Engines, transmissions, turbines, compressors, pumps • Gears, chains, bearings, brakes, clutches, couplings • Lubrication methods & systems • Friction & wear • Industries: rail, automotive, power, process, food, manufacturing, alternative energy (wind), marine, aviation, mining, oil & gas, chemical Additional e-mail: [email protected]

Mechanical engineering • Electrical engineering • Agricultural engineering • Electromechanical engineering • Process and machinery • Electrical fires • Plumbing • Electrical systems

I am a chartered quantity surveyor with over 18 years’ construction experience in residential, Ministry of Defence, education, healthcare, industrial, mixed-use, infrastructure and commercial building. I have significant hands-on experience in quantity surveying and contract administration under numerous suites/forms of contract including JCT, PPC, NEC, EPIC/EPC and bespoke forms, as well as experience of most methods of procurement. I am a Partner at Quantum Experts and able to act as a party-appointed or...

Health & safety management systems • Organisational culture • Training & education • Incident investigation • Workplace traffic management • Machinery safety & guarding • Manual handling • Noise • Thermal comfort & stress • Confined space entry • COSHH assessments • Airborne contaminant control • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE • Exposure to hazardous substances • Asbestos exposure • Occupational hygiene

Principal Consultant of structural analysis for a major consultancy operating worldwide • Over nearly 30 years my particular fields of expertise are: • Stress analysis • Structural design, analysis, engineering & integrity • Finite element analysis • Fatigue • Fracture mechanics • Creep • Crack growth • Failure analysis • Dynamics • Vibration • Shock • Non-destructive testing • Design code assessments • Pipewhip • Missiles • Jet loadings • Blast • Safety cases • Risk management • Probabilistic analysis • Peer review

Building services • Air conditioning systems • Office air conditioning systems • Boiler plant & heating systems • Condensation in building fabric • Drainage & plumbing • Environments for museums & works of art • Fees for consulting engineers • Close controlled environments • Swimming pool plant & equipment • Engineering evidence