Mr Polak in LIVERPOOL
Mechanical engineering machinery & components • Engines, transmissions, turbines, compressors, pumps • Gears, chains, bearings, brakes, clutches, couplings • Lubrication methods & systems • Friction & wear • Industries: rail, automotive, power, process, food, manufacturing, alternative energy (wind), marine, aviation, mining, oil & gas, chemical Additional e-mail:
[email protected]
Mr Corrigan in LONDON
Hugh has over 35 years’ experience in civil, structural and multidisciplinary design, engineering and management of major infrastructure and building projects, including design-build, PFI and BOT projects. He has been responsible for the design and management of many unique building and infrastructure projects, including complex above and below ground structures in difficult ground conditions. Hugh has extensive expertise in civil, structural, geotechnical, transportation, utility, water, wastewater design...
Mr Pulford in ASHBY-DE-LA-ZOUCH
Mechanical engineering • Pressure vessels • Pressure systems • Safety of amusement rides • Safety of fairground rides • COMAH regulations • Gas explosions • Machinery guarding • Forensic engineering • Scaffolding • Construction • Chemical industry • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE
Mr Hoyle in ASHBY-DE-LA-ZOUCH
Detailed forensic investigation of accidents, incidents, materials and mechanical failure • Product liability/fitness for purpose • Application of health and safety legislation and associated standards • Hazard identification and assessment of risk • Incorporated Engineer with practical experience in the Lifting Equipment and Lifting Operations Regulations (LOLER) and Pressure Safety Systems Regulations (PSSR) inspection industries • Competent in lifting equipment, work equipment, Machinery Directive and general workplace...
Mr Jolly in GLASGOW
Specialist in civil & structural engineering • Building structures • Nuclear-related structures • Inspections & appraisals of civil work & structures • Roads & drainage for industrial & housing developments • Experience in planning & building warrant submissions • Power industry, including renewable energy, power stations & substations • Embankment failures • Causes of flooding of land & property • Accidents on construction sites • Tripping accidents • Approved certifier of design • CDM Coordinator for CDM Regulations • Structures...
Mr Barrows in ST HELIER
Expert witness and troubleshooting of the following electrical building services: • Extra low voltage • Safety extra low voltage • Low voltage • Standby generation • Uninterruptible power supplies • Critical and essential electrical systems • Earthing • Lightning protection • Interior lighting • Exterior lighting • Emergency lighting • Fire alarm systems • Due diligence surveys and investigation • Mediation • Scott schedules • Contractual disputes • Testing and commissioning procedures • Dilapidation surveys • Forensic investigations • Electrical...
Dr Lockwood in LONDON
Electrical power systems • Switchgear • Transformers • Variable speed drives (VSDs) • Uninterruptible power supplies (UPS) • Power electronics • Circuit breakers • Switches • Transient voltages • Generators • Busbars • Electrical faults • Electro-mechanical devices • Relays • Solonoids • Electrical motors • Electrical heaters • Control systems • Boiler controls • SF6 breakers • Batteries • Vacuum circuit breakers
Mr Aron in LONDON
David Aron has over 20 years’ experience of energy expert witness work. He has acted as an expert at the Permanent Court of Arbitration in The Hague and the World Bank Tribunal in Washington. He has been the determining expert in an energy price dispute between Australian producers and an Asian buyer. He has also been an expert at the London Court of International Arbitration and the UK High Court, as well as the International Chamber of Commerce. He is a Member of the Academy of Experts.
Mr Marshall in LONDON
I have a wide experience in mining, process industries, power generation, construction and mechanical and electrical engineering. I have been instructed on a broad range of matters, ranging from pressure vessels to electronic controls. Most engineers know how systems should work, and how to interpret standards. My speciality is in understanding, and explaining to laymen, why engineering systems do not work as expected, and in devising and implementing proportionate remedial measures. I have a good track record...
Eur Ing Lumley in LONDON
Technical: • Petroleum products, including treatment design & development • Energy conservation & management • Environment • Oil & gas processing • Pipelines • Metal cutting • Metal forming • Mineral oil extraction • Gas supply & control • Pharmaceutical products • Process plant • Pressure vessels • Food & drink processing machinery • Chemical industry machinery • Welding • Functional: • Consultancy services • Process engineering & contracting • Quality control • Assurance & inspection ISO 9001/2 • Project management • Purchasing & procurement • Contracting •...
Mr Lovis in SANDBACH
Consultant Forensic Engineer & expert witness undertaking the investigation of engineering incidents & personal injury accidents for commercial, legal & insurance clients • Provision of independent & impartial expert witness evidence • Mechanical, metallurgical & non-metallic materials (i.e. polymer, composite, rubber, glass & ceramic materials) based investigations • Forensic investigations both on-site & laboratory based • Component failure analysis, including expertise in fractography & electron microscopy (SEM) •...
Eur Ing Kelly in DERBY
Expert opinion in electrical engineering • Electrical installation disputes • BS7671 IET Wiring Regulations • Electricity at Work Regulations • Verification of electrical installation designs & specifications • Part P of the Building Regulations • Advice to contractors & consultants based on technical, legal & safety requirements • Forensic analysis of electrical fires
Mr Eade in SEDLESCOMBE
Consultant Chartered Engineer with extensive experience of electrical and control systems engineering, primarily relating to electrical installations and equipment • Certified Member of the Expert Witness Institute • CUBS Criminal Expert Witness Certificate holder • Published author on electrical safety of installations and equipment (by the IET) • BSI Standards Committee Chair or Member covering electrical installations and electrical safety, events and entertainment (including film and TV), electromagnetic compatibility...
Mr Bennett in ASHBY-DE-LA-ZOUCH
Electrical engineering • CE & PUWER conformity • Project management • Control systems • Machinery safety • Functional safety • Electrical inspection & testing • Electrical fire • Product recall • Insurance claims • Electrical installation disputes • Cardiff University Bond Solon Expert Witness Certificate
Mr Carlisle in UPMINSTER
30 years working in power generation • Industrial plant • Project development and operations Experienced with major coal, oil and gas-fired power plants • Renewable energy • Wind turbines • Solar farms • Biomass • Electrical networks • Repair and maintenance facilities • Rotating machinery • Diesel engine generators • Gas-fired engines • Boilers • Transformers • Gas and steam turbines • Steam systems • Compressors • Pumps • Heat exchangers • Fuel preparation and storage • Materials handling • Investigations and root cause analysis • Drafting reports
Mr Maliakis in ESHER
1. Power plants (fossil fueled, combined-cycled, solar other RES). Expertise in power systems, protection, switchgear, transformers, generators, automation, communications 2. Data analytics - statistical analysis, based on statistical process control (SPC) and statistical quality control (SQC) 3. Maintenance activities, root cause analysis, root cause failure analysis 4. International arbitration in construction and energy disputes 5. (Re-) Insurance claims support 6. Loss adjusters support Mr Maliakis is based...
Professor Arnold in SOUTHAMPTON
Accident, fire & explosion investigation in electrical installations • Electrical apparatus & plant failure • Electricity generation, transmission, distribution & supply, overhead lines & underground cables • Electrical installations disputes • High reliability systems • Renewable energy, feasibility, design, advice • Electrical power systems, design, installation, commissioning, operation & maintenance Experience Electricity Supply • Generation, transmission, distribution • Operations, maintenance, research, design,...
Mr Dean in LEATHERHEAD
Power distribution systems • Cables • Cable failures • Power transmission systems • Cable joint design • Cable joint failures • Cable accessories • Cable terminations • Cable accessory design • Cable installation • Electrical equipment condition assessment • Partial discharge testing • Third party damage to cable systems • Underground cables
Mr Oakley in BIRMINGHAM
Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering;...
Mr Alyah in KINGSTON UPON THAMES
Mr Mamoon Alyah is a Chartered Electrical Engineer with 36 years of experience. Over the years, Mr Alyah has been instructed as an expert by clients in the USA, UK, Europe, Middle East and Australia. He prepared expert reports and provided expert advice in matters involving electrical power such as turbines (gas, steam and hydro), solar (PV and CSP), wind, transformers, switchgear, cables and others. Mr Alyah has given evidence in courtrooms and arbitration proceedings in numerous jurisdictions around the...
Mr Wood in ASHBY-DE-LA-ZOUCH
Mechanical engineering • Asset management • Pressure vessels • Pressure systems • Lifting equipment and lifting operations • Safety of amusement rides • Safety of fairground rides • Machinery guarding • Movable bridges • Steel industry • Water pumping stations • Bulk handling equipment • Marine engineering • Mechanical lifting equipment • Lock gates • Power hydraulics • Industrial engineering
Eur Ing Rigby in TWICKENHAM
Expert in project management and contract management in the following sectors: electricity, renewables, electricity industry, electricity markets Wind farms - offshore, construction Electricity distribution systems • Electricity generation • Electricity substations • Electricity trading Renewable energy Energy industry: contracts, offshore, project management, quantum Energy markets: energy plant, onshore wind, offshore wind, renewable energy, grid, electricity transmission, electricity power lines and power stations....
Eur Ing Simpson in EASTBOURNE
Keith has wide knowledge and experience in building services engineering (UK/international) in mechanical and electrical systems; private, public and military sectors. • Forensic engineering analysis professional competence - compliance with regulations, standards UK, EU(EN) • Power generation and electrical installations (power and lighting) design and construction • Mechanical (HVAC) engineering systems • Premature obsolescence, materials life-cycling
Dr Doherty in LIVERPOOL
Nick is a Chartered Engineer and has been a mechanical engineer at Brookes Bell since 2005. He obtained MEng in Mechanical Engineering with Energy Studies from The University of Strathclyde in 1999. He obtained PhD in fluid mechanics research in 2005. His principal role at Brookes Bell is Computational Fluid Dynamics (CFD) analysis for various hydrodynamic and aerodynamic projects and fire simulations. He has advised clients as an independent expert on a number of legal cases and given evidence in arbitration...