Investigation of industrial & leisure accidents of almost every kind • Preparation of detailed court reports supported by photographs & plans • Manufacturing plant & machinery • Sports, play & leisure • Slips, trips & falls • Manual handling • Woodworking machinery • Work-related upper limb disorders • Consumer product defects • Noise & deafness • Construction work • Fork-lift trucks • Agricultural machinery • Road traffic accidents • Ladders & scaffolding • Fires & explosions • Welding • Hand-arm vibration syndrome

Mechanical engineering • Mechanical failure • Product failure • Pneumatic engineering • Hydraulic engineering • Automotive engineering • Personal protective equipment • Classic vehicles • Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering;...

Inhalation toxicology • Biochemistry • Central nervous system • Combustion or fire toxicology • Multiple chemical sensitivity • Human health risk assessment • Industrial chemicals • Fire-retardant chemicals • Pharmaceuticals • Pesticides • Anaesthetic agents • Cyanide • Carbon monoxide • Eurotox Registered Toxicologist, 1998 • Full Member of British Toxicology Society, 1998 • Diplomate, American Board of Toxicologists, 1996 • Full Member of Society of Toxicology, 1986 • Member of editorial boards for Inhalation Toxicology & Journal of Fire...

Metallurgy • Welding fabrication • Corrosion • Materials selection • Mechanical testing of materials • Identification of material damage mechanisms

Asbestos exposure & illness: asbestosis, mesothelioma, lung cancer & pleural disease claims, property contamination • Occupational noise exposure (NIHL) in all industries • Occupational health - respiratory, dermal & cancer claims, e.g. dust, metals, silica, solvents, gases, lead, temperature & light • RSI/workplace injury • Musculoskeletal, PPE issues & accidents • Microbiology: mould & bacteria, Aspergillus spp • Water quality/source for injury, health (e.g. Legionellosis) & property • Land contamination by spillage...

Exposure assessment and control of chemical, physical and biological agents • Personal protective equipment requirement, selection, use and management • Risk assessment • Health and safety management systems • Incident investigation • Manual handling • Asbestos exposure

Health & safety management systems • Organisational culture • Training & education • Incident investigation • Workplace traffic management • Machinery safety & guarding • Manual handling • Noise • Thermal comfort & stress • Confined space entry • COSHH assessments • Airborne contaminant control • Experienced in the assessment of requirement for, procurement, training, fitting, use, storage & maintenance of PPE & RPE • Exposure to hazardous substances • Asbestos exposure • Occupational hygiene

Experience covers failure investigations on: • Metals: ferrous & non-ferrous • Non-metals: plastics & glass • Welding & fabrication • Lifting equipment, cranes, hoists, chains, nylon slings & hooks • Fire damage • Plant & machinery component failures • Construction materials & components: bolts, rebar, glazing units, etc. • Surface coatings: metallic, organic or thermally sprayed • Non-destructive testing • Historic structures & materials: bronze, cast iron & wrought iron • Corrosion problems: inland & marine • Marine failures:...

Accident investigation: agriculture; agricultural machinery and vehicles; construction sites; mechanical; factories; falls, trips and slips; footpaths, pavements, pedestrian; forklift trucks; HGVs; industry; ladders; leisure industry and sports; lifting equipment; lifting; machinery; manufacturing industry; occupational; plant engineering; play areas and playgrounds; scaffolding; warehousing industry; welding; woodworking industry Mechanical design • Mechanical appliances • Mechanical engineering, including project...

Experienced skin laser practitioner • Fellow of the Royal Society of Medicine • Emeritus President of the British Medical Laser Association • Negligence involving skin laser treatments • Ultra-violet radiation • Sunlight (biological effects) • Eye protection (UV, lasers, light, heat ray, infra-red, microwaves) • Lasers • Medical lasers • Laser safety • Non-ionising radiation • Sunbeds • Laser pens • Laser pointers • Laser hair removal • Laser treatment of veins • Head of skin laser clinics • Fellow of the Institute of Physics

I accept instructions from defendants and claimants via solicitors on most health and safety topics. I have particular experience in health and safety legislation, fatal accident investigation, manufacturing, construction, banking, education, healthcare, charity, retail and pharmaceuticals. My skills include: risk assessment, training, work at height, fall prevention, safe systems of work, safety documentation and policies, fire safety and protection, COSHH, manual handling and work equipment.

Metallurgical failure investigation • Failure analysis of polymer and composite materials • Expertise in a range of failure mechanisms, i.e. corrosion, mechanical failure, high temperature, structural failure, welding, coatings • Particular expertise in the thermal degradation of austenitic stainless steels and nickel-based alloys • Extensive experience in corrosion mechanisms for the power, petrochemical and oil and gas industries • Forensic engineering

Weld flaws • Welding metallurgy • Welding procedures • Weld procedure qualification • Structural integrity • Engineering Critical Assessment and BS 7910 procedures • Fracture mechanics • Brittle fracture • Fracture toughness testing • Fracture and fatigue of welded structures • Steel metallurgy and microstructures

I have over 25 years' experience as the technical director of two engineering firms (one in general engineering and one in laser cutting) and as a visiting Professor of Engineering at two universities (Nottingham and Stuttgart). I hold all four of these posts at the moment and they form the foundation of my expert witness work. My particular areas of expertise are: • General engineering, welding & fabrication • Laser cutting & welding • Water jet cutting • Profiling • Materials engineering • Health & safety

Technical: • Petroleum products, including treatment design & development • Energy conservation & management • Environment • Oil & gas processing • Pipelines • Metal cutting • Metal forming • Mineral oil extraction • Gas supply & control • Pharmaceutical products • Process plant • Pressure vessels • Food & drink processing machinery • Chemical industry machinery • Welding • Functional: • Consultancy services • Process engineering & contracting • Quality control • Assurance & inspection ISO 9001/2 • Project management • Purchasing & procurement • Contracting •...